Pelagic Subsea Control Fluids: Product Range OverviewPelagic 100 Fluids are water based high temperature subsea control fluids capable of operation between -50°C and +170°C. They are available in 3 separate antifreeze grades as follows: Pelagic 100 (M): Medium Antifreeze (25%) with a pour point of -24°C Pelagic 100 (H): High Antifreeze (40%) with a pour point of -30°C Pelagic 100 (HC): Very High Antifreeze (60%) designed for Hydrate Control with a pour point below -50°CPelagic CLEO is an Environmental Oil based subsea control fluid capable of operation between -45°C and +250°C and is designed for super high temperature/high pressure wells and closed loop system utilising a return line to platform. This fluid can replace Brayco in existing closed systems.
 
Water Based Subsea Control FluidsPelagic 100 Subsea Control Fluids are low viscosity water based hydraulic fluids, specifically designed for operation in subsea production control systems.
Environmental Oil Based Subsea Control Fluid
Pelagic CLEO is a High Temperature Environmental Oil based Subsea Control Fluid. It was developed to bridge the technology gap between water based fluids and the extreme HT/HP developments of the future by providing a very stable high temperature fluid capable of maintaining temperatures in excess of 250°C for a project lifetime.
In addition, with the potential future requirements for closed loop systems in some sectors this environmental oil is not only acceptable for direct discharge to sea but is designed to offer all the properties of traditional oil based fluids in closed loop systems.
Pelagic CLEO is fully compatible with Brayco Micronic SV3 (and SV/B) and can be used to replace such fluids in existing systems where a stronger focus on environmental discharge is required.
|
Is a privately owned speciality chemical company operating In the offshore oil and gas industry.
The Company has been Involved In the development, manufacture and Global supply of BOP and Subsea Production Control Fluids since 2001 with our Pelagic brand of environmentally superior subsea control fluids.
To develop and supply environmentally superior subsea control fluids to the Offshore industry with NO compromise in technical performance.
Our product range includes environmentally acceptable BOP and Subsea Production Control Fluids for all regions of the world including super environmentally sensitive areas such as the Barents/Beaufort Sea.
Pelagic 100 is our mainstream high technology water based subsea production control fluid for temperatures up to 170°C. Click Here
Pelagic CLEO is our super high temperature environmental oil based subsea fluid for use at temperatures up to 250°C. Click Here
Pelagic MEG/Water blends are typically utilised in the flushing and storage of thermoplastic umbilicals as they contain no corrosion inhibitor package. Click Here
Pelagic SST fluids are typically utilised in the flushing and storage of Steel line umbilicals and manifolds although the SST 10 series can also be used in storage of thermoplastic umbilicals due to its lower pH range. Click Here
Pelagic 50 is our mainstream high performance BOP Fluid Concentrate for Semisubmersibles and Drillships.
Click Here
Pelagic V18 is our mainstream high performance Closed Loop BOP Fluid for Jackups and Barges.
Click Here
Niche Products has been providing PLONOR hydraulic fluids for use In the Norwegian Sector of the Barents Sea for many years.
The Barents Sea Region requires that if a product is to be permitted for discharge then it must contain only chemicals from the PLONOR list (Poses Little Or NO Risk to the marine environment). Click Here
Pelagic OceanDYE is our General Subsea Leak Tracing Dye.
Click Here
Pelagic EnviroDYE is our super environmental Leak Tracing Dye. Click Here
OceanSENSE leak detectors are recommended for use with Pelagic Dyes. Click Here
For every litre of hydraulic fluid produced by Niche Products, the company pledges to donate the technology necessary to provide 1 litre of acceptable drinking water to people living in developing countries